-
Unfortunately, this issue just appeared again after updating to the latest firmware for Cerbo GX. This time "USB-RS485_Cable" is not detected properly and the product type is listed agai…
-
### The problem
Background info:
2 Devices total on the CAN bus, ESP32 with TJA1050 and Inverter.
If the inverter is powered off, disconnected or not Acknowledging messages there are no other dev…
-
Im Moment werden die JK Inverter BMS via Bluetooth nicht unterstützt.
Das JK BT Protokoll des Inverter BMS sollte unterstützt werden.
-
Have look into the JK BMS description for current A: x84
[x84](https://github.com/syssi/esphome-jk-bms/blob/c97b660e4005b8f79eb98ed89ee14b25598875b1/docs/protocol-design.md)
I used this code who d…
-
### Describe the bug
I’m facing sporadic disconnect issues after a while (sometimes one hour, sometimes a day or a bit more). Venus OS doesn’t recognize the disconnect as values don’t get updated. Af…
-
### Is your feature request related to a problem? Please describe.
Mit der Zeit verändert sich jede Zelle individuell und somit auch ihr Verhalten im Kopf- / Fußbereich vom Spannungsverlauf. Eine F…
-
Hi, I have a JK B2A8S20P with a JK RS485 adapter (GPS UART port to RS485 port), it is working OK on windows with JK monitor app. I have configured on linux your configurator, tried to use ID 0 and 1, …
-
Hi,
Thanks for your effort! I am currently using your Code for a home solar project including a battery bank with chargery bms.
Would it be possible to monitor a second BMS with an additional FTDI…
-
Hi Steven,
I recently bought some JK BMSs and would like to integrate them replacing the JBD ones.
I have NodeRed flows that were using your jbdtool and maybe for me is easier to replace it with jkt…
-
```
0003d98c 4d 4f 53 ds "MOS over temperature protection"
0003d9ac 4d 4f 53 ds "MOS over-temperature protection is released"
0003d9d8 41 62 …
syssi updated
4 months ago