-
Currently the CAN packet reception path for ESP32 is the following:
- pca1000 driver in IDF -- interrupt priority
- esp32 driver RX and TX message queue
- RX and TX tasks created by the Esp32H…
-
Hi Bob,
I am Jeff Snyder working with Jake at TCSDCC. I am not yet familiar with how to submit and issue to github so I wanted to use this reply to contact you for now. I am coding similar to the pyt…
-
After opening up a web-based throttle, I click on the locomotive number at the top and a list of available locomotives in my roster shows up on the screen.
There is no way to scroll up and down the …
-
I appreciate that this FR is out of scope for controlling an engine; however with VSD sounds now being incorporated to enhance the operating experience, I thought this might also be worth considering.…
-
I've seen a few videos online that DCC++ can read and write cv's, but I cannot get it to work. I am currently using the arduino and a command station, it will run the trains great, even via my phone!…
-
-
Hi Tim, Are you still around? I don't think you log in to Trainboard anymore. Did you do any more work on the board to get it to go right side up and remove the inverter?
-
I have been working on a large scale mobile decoder running on an esp32 (with a _lot_ of assistance from and collaboration with @atanisoft). Currently my code is using the Arduino framework.
I have…
-
CANCSB shares the same firmware as the CANCMD. Please can a CANCSB module descriptor file be included? In principle, the CANCMD-A50A-4d.json can be renamed / generated as CANCSB-A537-4d.json (CANCSB i…
-
Hi, first thanks for that cool project.
I bought an ardolino uno, a ardolino standard shield, and use jmri.
Within 2 days all woks fine except the programming Read cv
I have 16 volt dc, and i can p…