-
**Environmental Info:**
K3s Version: k3s version v1.18.8+k3s1 (6b595318)
Running on CentOS 7.8
Node(s) CPU architecture, OS, and Version:
Linux k3s 3.10.0-1127.19.1.el7.x86_64 #1 SMP Tu…
-
### Description
I tried adding a new pool.
Before:
```
agent_nodepools = [
{
name = "agent-1",
server_type = "cx41",
location = "fsn1",
labels …
-
### Application Version
5.2.1
### Platform
Windows 10
### Printer
Prusa I3 MK2
### Reproduction steps
1. Upgraded Cura from 4.4.1 to 5.2.1
2. Uploaded all default parameters and settings accor…
-
### Is your feature request related to a problem? Please describe.
Some Chinese processor boards have switched to the GD32F103 which is an STM32 clone that is pin compatible and almost identical, but…
-
**Environmental Info:**
RKE2 Version: v1.24.4+rke2r1
**Node(s) CPU architecture, OS, and Version:** Linux 5.4.0-132-generic 148-Ubuntu SMP Mon Oct 17 16:02:06 UTC 2022 x86_64 Linux
**Cl…
-
I have been struggling with consistent layer shifts (not always at the same layer) printing thorugh Octoprint on my Prusa MK3S. Layer shifts are on the order of 0.2 to 0.5mm can would typically happe…
-
When following the klipper installation process the firmware compilation step fails. After sending following the command to the Raspberry Pi the process ends with an error:
`make flash FLASH_DEVICE…
-
_Originally posted by @nirui in https://github.com/k3s-io/k3s/issues/2509#issuecomment-786573486_
Not sure if my issue was related.
But I got the same `flannel exited: failed to acquire lease: n…
-
Quick Note: This is super low priority, its just an issue which might save some users some time if addressed
Issue: When updating the Klipper software the /etc/defaults/klipper file is not correctl…
-
Hello, I am running klipper on debian Core 2 duo with mechanical HDD. When I am printing very slowly I am getting error mentioned bellow. I read these issues https://github.com/KevinOConnor/klippe…