-
If you disconnect the LG TV from the power supply and then switch it on again, there is a small time window during the boot-up sequence where a TCP connection can be established. Approx. 7 seconds. If…
seizu updated
7 months ago
-
Has anyone figured out how to properly setup a packet forward for the WOL component? It all works fine on the same subnet - so it's not a bug - but wondered if anyone out there was able to come up wi…
-
Hey I've an problem with this lines:
`function startTv(): void {
const TvApi = require('node-lgtv-api');
const tvApi = new TvApi('192.168.1.192', '8080', '325887');
tvApi.setDebugMode(true);…
-
Hi,
i have an inject node that on 1 am send an OFF to the tv, everiting works if tv is On.
BUT, i the tv is off from about 4-5 hours when the inject node send the Off, the tv turns On...
If i…
-
If you turn your TV off with the remote and then send the system/turnOff command within the first minute or so, the TV switches back on.
Seems like the LAN port is still accepting connections at tha…
-
![image](https://user-images.githubusercontent.com/25530709/114070218-10dc6280-98a0-11eb-943d-10a430428494.png)
-
Hi,
I finally found solution to change e.g. picture presets. Please see my last comment at:
https://community.home-assistant.io/t/lg-webos-change-picture-setting-mode-with-scripts/262915
Mayb…
-
I doubt anyone is even looking at this anymore but just wanted to point out I'm unable to connect to the TV using this palette. I have a 2023 LG G3 and while the native Home Assistant integration wor…
-
Hello,
I am using this integration in home assistant. I would like for the automation to trigger based on the Power state change.
Manually calling the endpoint "com.webos.service.tvpower/power/g…
-
Hello,
I run XBMC (OpenELEC 4.0.7) as my media center. It's hooked up to an amplifier (Pioneer SC-2024) that is later connected to the HDMI switch that AmbiTV (HDMI2AV -> Grabber -> Pi) and my LGTV i…