-
Please include the following information when submitting a bug report:
* board/firmware version:
```
(sysname='LoPy', nodename='LoPy', release='1.10.1.b1', version='d8e32ac-dirty on 2017-11-16', …
-
Hello all:
I am using a LoPy4 with firmware version 1.20.0.rc13.
I am updating the firmware version from 1.20.0.rc13 to 1.20.2.rc6, via FileZilla (FTP) using the method B described here: https:/…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
G01
* The firmware version you are using. You can get it by executing…
-
I am managing to get a small example to build and run, that is not panic, on different MCUs, but am having no luck with communication to a receiver. I think I have all parameters set the same on sende…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* G01
* The firmware version you are using. You can get it by execut…
-
On a Heltec Wireless Stick using the current source from the heltec branch using network.Bluetooth is not possible.
```
Pycom MicroPython 1.20.2.r4 [3b24896] on 2021-03-26; Heltec Wireless Stick wit…
ogra1 updated
3 years ago
-
I'm struggling to figure out how to initialize a connection. I'm looking for an example of the proper method in node red to get the telnet session up and authenticated with username and password. I …
-
I procured the Pycom Expansion Board 3.1 and the Lopy4 to function as a Lora module recently.
First while trying to update the Expansion Board 3.1 firmware, did the following:
- Connected the Expa…
-
**Describe your question or issue**
Hi,
I would like to know if the Pycom LoPy4 is easy supported with this library, or that we should develop some custom Hal Configuration for this board first.
…
-
**Describe the bug**
horrific performance
**To reproduce**
Steps to reproduce the behavior:
1. play a mod pack with mod enabled
**Expected behavior**
decent performance
**Screenshots or …
xg787 updated
3 months ago