-
Adafruit 32u4 boards with basic temperature sensors. Testing them for a reading and connecting to The Things Network.
-
Add LoRa protocol to connect sensors over long distances and send data if no wifi network is available.
-
In TTNv3 with US915 and LoRaWAN 1.0.2 configured for the device the following FOpts is in the downlink: 03 32 00 00 71 03 32 00 ff 01 which consists of:
03 32 00 00 71 = LinkADRReq (DataRate = 3, TXP…
-
**Describe the bug**
The device sends too many uplinks (at a 5s interval) at the beginning of the execution.
**Environment**
- LMIC: 4.1.1
- PlatformIO Core: 6.1.4
- Network provider: Chips…
-
Per @svelmurugan92, this isn't working.
-
Base question/issue: I can't get LMIC_PRINTF_TO working on SAMD21. Tried with Arduino 1.8.6 and 1.8.12 on Windows, both with current LMIC. When I uncomment #define LMIC_PRINTF_TO Serial and set LMIC_D…
-
Hello there,
I am currently using a TTGO LoRa 2.16 in order to connect to the The Things Network. I replaced all the fields on the example sketch (ttn-otaa) from my TTN console. It has already been…
-
Three days ago, I came across this project, which is exactly what I needed, as I have an Orange Pi One and a 433MHz SX1278. I've been trying to get this working (with the default config), only partly …
-
Hi everyone,
I know support for class B is labeled as untested, but I would like to change that :wink:. Can anyone give me some advice how I can debug support of class B, because I'm currently stuc…
-
Hi,
We have been running lorawan compliance tests on the FW and I've followed the advise given in this slide:
https://lora-alliance.org/wp-content/uploads/2020/11/lora_alliance_certification_deep_…