-
Hi,
I'm facing a Guru Meditation Error on my ESP32 Dev Module and ESP32-S3 Dev Module boards when trying to implement a basic code. The error occurs when sending the MIDI clock message, and it lead…
-
Hi,
First, sry for my english... I will be more clear possible.
I am using u library in my projetct, where i am using Rpi Zero W with a TFT with Touch. All is working fine, but the bluetooth not…
-
continued from https://github.com/monero-project/meta/issues/934
Location: [Libera.chat, #monero-community](https://libera.chat/) | [Matrix](https://matrix.to/#/#monero-community:monero.social?via=…
-
微博内容精选
-
Please add `setConnectionInterval(min, max)` for BLE services such as MIDI. The BLE MIDI spec requires/suggests a connection interval between 7.25 and 15 ms.
Sample implementations:
https://gith…
-
Greetings,
I'm currently working on a project that requires bluetooth and ulab (numpy/scipy for micropython) on the Raspberry Pi Pico W. To this effect, I downloaded the most recent version of micr…
-
Pi OS: ubuntu 22 .kernel is 5.15
using SDIO only firmware
SDIO pins and reset pin are connected between Pi and Esp32.
CMD and DATA03 are pull-up by Rpi gpio setting
After modprobe bluetooth and cf…
-
Hello and congratulations on this brilliant st7789 library upgrade for ESP32 S3 LCD. Very well documented.
I have successfully run many tests from your examples folder on my [Lilygo T-Display ES32 …
-
**My Problem**
**i am stuck with this problem for more then a week if any Googler out there can you help me !**
After few attempt the GATT service is getting disconnected i don't know the reas…
-
I compiled with the devkit-vi env. Ble is enabled and using Midi+BTLE app on my android phone to scan, I am seeing a device 7512CFA4 when I power up my pedal so seems like it is working.
I run amplit…