-
Feature: have the Lovelace global definitions be available in HA templates and automations. This would allow the metadata to be used in automations (or anywhere Jinja is used). I'm willing to do the…
-
I upgrade from 0.8.0 to 1.2.1 and since then motion sensor stopped working — the web UI shows
> Motion: false
no matter if it's triggered or not. It was working fine on 0.8.0. My GDO is using S…
-
According to https://github.com/noctarius/lightify-binary-protocol, it may be possible to read "Battery value", "Enabled value" and "Triggered value" for motion sensors.
Unfortunately, I don't have…
-
### The problem
Something is blocking Home Assistant from wrapping up the start up phase. HA instructed me to report.
### What version of Home Assistant Core has the issue?
2024.7.1
### What was …
-
### The problem
I have about 15+ shelly plus devices (gateway activated) and 4 Shelly Blue Devices,
my issue is that only one activity every 10 minutes (approx) are recognized through homeassistan…
-
Hi,
Use case : We are a society (Telecom Design) developing a technology designed for Iot and M2M market.
Because of this, we woud like showcase our knowledges on the smart things market (Gps techno…
-
I recently installed Home Assistant on a Raspberry Pi4 with SSD and conbee 2. Running the Deconz add-on and want to have hue lights, motion sensors and aqara sensors on the network.
When I found ou…
-
The spec often talks about the underlying concrete sensors that are being used to provide the device orientation and motion. However, these sensors themselves are immaterial to the actual resulting ev…
-
### Description
From what I can see, there has been discussion on and off for a long time now about sensors that detect, accurately and in real time, actual motion of filament, so that these could …
-
I have the cync dimmer switch with motion and light sensor running on the latest firmware (neutral required). In home assistant the light switches can be turned on and off, and are dimmable. However, …