-
Hello,
This is my first issue so excuse me if I do not have the proper format.
I would like to add the following 2 boards to the boards directory:
1.) nucleo_u031r8 (very new)
2.) nucleo_f303ze…
-
Calibrating the HSI with the factory-programmed values (setting HSICalibrationValue to 16 while initializing RCC) results in a clock rate of approx. 14 MHz rather than the rated 16 MHz.
This error…
-
#### Description
Boards based on a `common` board sometime only use `Makefile.include` but not `Makefile.dep`, or do not process `Makefile.features` even if it exist.
Sometime a common `Makefile.d…
-
Hi,
I wonder, whether somebody port uip also to other arm platforms as LM3?
Most LM3 boards are not available anymore and only other board with uip is avr32. May be it's about time to use more updat…
-
Hi,
I started to do some test with my Nucleo-144 F767ZI board using STM32 MCU. I want to try to port the CS-EX to STM32.
I was able to replicate the old DCC++ PWM overflow IRQ to change the freque…
-
I have no idea why this board is not supported while in the main site clearly refrenced to being supported by arduino
Name: Nucleo64 STM32G070
Link to all relevant information:
Documentations : […
-
The use case as stated in https://community.platformio.org/t/how-use-a-same-chip-but-with-different-environment/18082 is pretty valid. Instead of the framework's variant folder, like https://github.co…
-
### Description
I'm trying to flash a custom board based on the NUCLEO_H743ZI board using a NUCLEO_L476RG as a STLink. Everything works with mbed-cli, but not with mbed-tools. I mocked the platfo…
-
I'm trying to get the FreeRTOS-CLI working on a Nucleo board (F767 or F410RB) and while searching for it, came accross your project for the BlackPill.
A purchase was quickly done and I downloaded the…
-
https://www.st.com/resource/en/datasheet/stm32f446re.pdf
https://www.st.com/resource/en/user_manual/dm00105823-stm32-nucleo-64-boards-mb1136-stmicroelectronics.pdf
https://www.st.com/resource/en/appli…