-
_From @FelixXXL on August 10, 2017 20:49_
Sorry for my bad english.
when i try to setup openhabbian on rpi2 &rpi3 the homematic binding can't find things.
in the log file i found this line(s).
t t…
-
openhab2 seems to permanently write to the log files, and, if used, to files for the persistence services.
This script creates a memory file system to avoid hard disk access
````
#!/bin/sh
# O…
ms777 updated
5 years ago
-
Hi,
Make long story short - cannot pass value "3" to thermostat_mode.
Full story:
In Z-Wave binding there are two values for Thermostat_Mode for Fibaro FGT-001 Thermostat Valve
0 - Off
1 - Heat…
Tymo3 updated
5 years ago
-
hello,
I am using openhab 2.4.1 on a RPi3, and i get the following message in the "events.log" file:
`'rflink:bridge:usb0' changed from UNINITIALIZED to UNINITIALIZED (HANDLER_CONFIGURATION_PEND…
-
I took a "deep dive" into OpenHab and Z-Wave during the last days and got a working setup with a freshly installed OpenHab-Server on a Virtual Ubuntu Machine and a Razberry-Equipped Raspberry-Pi with …
m-d-f updated
5 years ago
-
_From @Vermatic on April 22, 2018 19:42_
I am new to OpenHAB2. I started with a fresh install of a 2.3.0-SNAPSHOT, installed the Homematic Binding and then wanted to add my CCU2.
## Expected Behav…
-
_From @mastix on November 16, 2017 13:31_
Hi guys,
## My setup
- OpenHAB 2.2 latest snapshot
- OpenJDK Runtime Environment (Zulu 8.25.0.1-linux64) (build 1.8.0_152-b16)
- Ubuntu 17.10 (x64) m…
-
Hello,
Is it possible to control local Alarm output of camera?
-
_From @Nugman on December 24, 2017 23:49_
## Expected Behavior
When saving the Thing configuration of a HM-CC-RT-DN heating valve, I expect that the values are saved to the device.
## Current Beh…
-
When a thing is configured but the depending binding is not installed there is not error.
First my things file, all exec things are working. I add astro, airquality and Bridge avmfritz which are no…
Josar updated
6 years ago