-
I see some weird (zero values) for registers where I would expect to see something.
Let me explain with an example.
This parsing is the result when my PV was producing, battery is charging, there is…
-
My Gosund SP1 power meter plug does not refresh power data unless the smartlife app is running. I have tried all DPS update tricks found but no success. What can be the problem? The final goal would b…
-
Use power low instead of log law for extrapolating wind speed to hub height.
## Description
The `extrapolate_wind_speed` function uses the power law and the grid averages forecast surface roughn…
-
Hi, the smart life app shows "total energy consumed" for the smart switches I have with power meters built-in. Also shows per month though I'd only care for the total one.
Would it be possible to a…
-
The inverter spits out a lot of data and some of it is difficult to understand. I hope we can collaborate on this to figure out what's what. Example below.
Q#1
`Phase A/B/C current/voltage/power` …
-
See forum https://community.openhab.org/t/oh4-transformationservice-of-type-js-is-unavailable/148786/1
### Problem
- OH 4.0.2
- on start up the log shows about 20 .. 30 warning messages as be…
-
![image](https://user-images.githubusercontent.com/1409996/72346603-9f325a80-36d6-11ea-96d0-b5ba38a989c0.png)
For some reason the used power from grid and the supplied power to grid are switching o…
-
Hello SE geeks,
I'm having trouble reporting my Own Usage (Eigen Verbruik) and Export/Bought (Exporteren/Gekocht) on the SE Monitoring platform. Using the Solaredge_meter with MQTT connected to SE…
-
### Link
https://www.amazon.com.au/Intelligent-Photovoltaic-Bidirectional-Automatic-Compatible/dp/B0CYPQHVYR
### Database entry
{"id":3,"type":"Router","ieeeAddr":"0xa4c138fa6becd2bf","nwkAddr":229…
-
Could you take the entities for an Energy/Meter from Grott? I still have a SDM630 installed in my installation. It is read out by Grott but unfortunately not displayed by you.
- MQTT jsonmsg:
…