-
Create static pressure sensor driver
Interface: LPSPI1
Sensor: BMP388
[Product page](https://www.bosch-sensortec.com/products/environmental-sensors/pressure-sensors/bmp388/)
[Datasheet](https://ww…
-
The the following variables of the model `Buildings.DHC.ETS.Combined.Subsystems.Validation.HeatPumpDHWTank` fails the verification vs the Dymola reference data:
- `heaPum.heaPum.COP`
- `heaPum.PPum`…
-
Source a pressure sensor for the aeroponics subsystem accumulator tank. Reports to computer. Allows for shutoff of pump in case of emergency.
### Context
**Is your feature request related to a pro…
-
### Device name
BMP384
### Device description
Bosch BMP384 Pressure/Altitude sensor.
### Device product page URL
https://www.bosch-sensortec.com/products/environmental-sensors/pressure-sensors/b…
-
As verbally discussed, ocean pressure, added in osrf/lrauv#91 to `TethysCommPlugin` in the interest of time, should be extracted into its own custom sensor, along with other science sensors in `Scienc…
-
Hi @jposada202020,
First, thanks for making the micropython driver for a DPS310 sensor.
I'm using your driver for a Lolin HP303B sensor (shield), which seems compatibly with the DPS310. I'm a so…
-
The current pressure sensor (MPX12GP) is not as easy to fit into a manufacturable design as I had hoped. It has straight leads and a long footprint, requiring either a hacky right-angle daughterboard …
-
Hi,
there's an error in the code when you adding one of these bad boys.
Please change /kit/mijia/index.js from line 76 from this:
```
let humidityV1 = new HumidityV1(mijia);
let temperatu…
-
The [sensor_msgs/FluidPressure](http://docs.ros.org/api/sensor_msgs/html/msg/FluidPressure.html) msg would seem to be more semantically correct than a bare `float64`.
-
The spec of the differential pressure sensor is 0-100mbar difference. For a straight tube of 20 - 30 mm, this would require very far pressure tap connections or very small difference, of the order of …