-
When i use w5500 as a eth device,i found that when eth bring up, it only write the mac register, and ip netmask gateway is configured but not write into it's register. Then i wirte the config into ip …
-
I encount this problem, no matter how I install the enviroment. Any idea what can cause it?
15/09/2023 12:58:30 | GPU: NVIDIA RTX A6000, CUDA: True, PyTorch: 2.0.1+cu117
Input
c=0, n=0 | fname=…
-
V1.1 hardware has `T_VCC_EN` signal that controls 3.3V target power (and should be handled carefully), V1.2 hardware also has `T_ENABLE` signal to control 5V line.
-
This is awesome HAL in terms of usage safety than any other I seen before. But it isn't so yet flexible in several cases.
I would like to configure SPI for display driver, which uses unidirectional…
katyo updated
4 years ago
-
Loadscreens are somewhat outdated:
- [ ] [command queues](https://github.com/ZeroK-RTS/Zero-K/blob/master/bitmaps/loadpictures/commandqueueing.png): very prominent soon-to-be-obsolete tankfac model.…
-
Loose collection of results and their interpretation (in part somewhat speculative), to be continued.
### Total throughput is limited by worst nodes in the network
The network breaks down when n…
-
Using load balancing `GeneralDomainDecomposition` is slower than `DomainDecomposition`, opposite to what is reported.
Used version ls1-MarDyn version 1.2.0_master_98d77b7d3, commit 98d77b7d31073a12…
-
https://github.com/styleguide/ruby
-
I have seen at least three cases of smd attempting to destroy my entire mail spool. In the three cases, I have mostly recovered thanks to backups, notmuch, and the distributed nature of SMD/email. But…
-
IIUC, the current framebuffer implementation packs colours of less than 8BPP horizontally. It would be useful for displays like the SSD1306 if the colours (in this case `BinaryColor`) could also be pa…