-
Tinker-MarlinUltimaker2-dual-17.02.1.hex
Tinker-MarlinUltimaker2plus-dual-17.02.1.hex
UltiGcode work Tinker-MarlinUltimaker2plus-17.02.1.hex
-
### Version
2.3.0 RC2
### Operating system type + version
Windows 10 X64
### 3D printer brand / version + firmware version (if known)
Blackbox ToolChanger / Duet 2 / Firmware 2.05
### Beha…
-
I would like to create a M175 build that works on the Mini. Unfortunately it seems Lulzbot's firmware (as of 2.6.22 lulzbot-cura) has terrible PID tuning for this hotend. I'm not sure if this is M…
-
Hi there, I bought a PanelDue 7 and I want to use it with the Radds 1.5 and Repetier firmware. I connected it to the serial port and installed the current firmware 1.23.2 on the PanelDue. I have conne…
-
**To Do:**
- [ ] Write code to measure the temperature
- [ ] Write code to write measurement to SD Card
- [x] Write code to write measurement to USBSerial
- [x] Make sure to follow the wiring diag…
-
This issue was addressed previously with someone else but now it is happening again. With the latest marlin bug fix downloaded 6/24/20 the board will not update and freezes on 100%. I have the MKS Rob…
-
Hi,
I have a new Flashforge Creator pro (sailfish 7.8) that for whatever reason won't complete a print if attempting to use both extruders via Octoprint + the GPX plugin.
However, exporting an x3g f…
-
hi how are you?
actually i am trying to connect tft 35 or mini 12864 v1 to the boart btt e3 rrf- through reprap and no luck((( https://teamgloomy.github.io/Configurator/Start using this one!)
cou…
-
i am trying to use reprap discount smart controller LCD 2004 and 12864 version with MKS robin Nano V3.1 board. i have tested the board using MKS TS35 and the display works fine. the 2004 and 12864 LCD…
-
### Description
Reverse the nozzle/hotend order on the Full Graphic display. This is helpful for people that have E0 on the right and E1 on the left. This is just a matter of right to left in…