-
What's the possibility of getting a new PCB? Looks the case was less than waterproof last night and if I try to charge the board now I see magic smoke coming from the L2 Power Inductor.
-
## `todo`
- [ ] Create page UI concept
- `@input` :package:
- [Previous Design by Toshi](https://www.figma.com/file/MHvLoXW15sF6HupfLJw6vr/wizard_amigos_homepage?type=design&node-id=12-…
-
Hey folks 👋, during Hacktoberfest I got ahold of a tool called [Holopin](https://holopin.io), which gave badges to people contributing to open source.
It seems that the Holopin folks are collaborat…
-
What screw size should be used for the CB1/CM4 mount? I tried 2mm and 2.5mm but neither seemed to want to screw in.
-
I have THERMA V, ODU - HU071MR.U44 and IDU - HN0916M.NK4. For some time I try to connect them to my HA server but without any result. That IDU have onboard modbus port and even two dip for control it…
-
For a good use of the MKS Robin, you gonna need to give some basic info:
-G-code Flavor
-usable pinout (I do understand that you can't give all the pinout since you made it clear that it is a close…
-
### OSCR firmware version
14.0
### OSCR hardware version
HW3
### Attach OSCR_LOG.txt file here
Cart Info
Name: BATMANFOREVER
bramCheck: 0100
Size: 32 MBit
ChkS: BC5F
Sram: None
Press …
-
## Thank you
First of all, this project is an amazing gem, pretty much exactly what I was thinking about designing and building! Thank you for that. I poked around the code and I see it's very high q…
-
With an arty_a7_100t board, I am not able to write or erase flash.
Loading an image directly to the FPGA works.
Using openFPGALoader, current master, f964c33.
On the first attempt, I got:
```
…
-
Please upload the schematics for the controller board. These will likely be `.SchDoc` files. While you're at it, there's nothing here at all for the electronics of the display or the tool head breakou…