-
Hi there,
I have LoRa gateway (RAK831) which has sx1301 chip for LoRa connectivity. My nodes are based on sx1278 chip. Frequency band is 433Mhz. In selecting the target radio transceiver sx1301 is no…
-
Module à implanter:
https://www.aliexpress.com/item/LoRa-E32-TTL-100-long-range-UART-SX1278-433mhz-100mW-SMA-antenna-wireless-module-3km/32918242151.html?spm=2114.search0104.3.199.4d2e6a28rDlO9I&ws…
-
Hi,
mit Interesse bin ich auf SIGNALESP gestoßen.
Um es kurz zu machen: Ich suche eine komfortablere Möglichkeit der Steuerung meiner 23 SOMFY RTS Motoren (aktuell steuere ich sie auf 5 Gruppenkan…
-
Tks this project. work perfect with sx1278 with rpi3b and arduino. I had test.
I have find a bug. sometimes can't received. but sometime OK!. Maybe problem is default timeout too small. need increa…
-
I am using two LoRa sx1278 with arduino uno boards. the sender node is working perfectly but the receiver doesn't show any received messages. LoRa initialization is okay in both receiver and sender.
…
-
Hi,
I am very interested in LORARC. I would like to support you on the hardware.
You can refer to the RavenLRS code so that this project can be developed rapidly.
-
Hi,
i want to use the SPI interface to communicate with a RFM95W LoRa module. I have some problems to get any action on the mcu pins :(. Maybe it is just one step
what i did:
I want to use SPI…
-
hello all, i just collect data when node send to gateway(esp12e) via mqtt parsing so its great i also send downlink via mqtt over ttn network and i can follow traffic on application data
but when…
-
The operating frequency of the MRZ-N1 weather balloon is very stable in flight, no worse than the RS-41. Please add to the calibration of the MRZ-N1 receiver.
thanks
-
Hi JaapBraam,I am coming again
When I set parameter GW_SF to a specific value(like SF10), the gateway can receive 100% ok,
But when I set the parameter GW_SF to ALL, the gateway mostly prompts "rx t…