-
After flashing the `sysupgrade` does not start. After power-on, the led is lit for 10 seconds, then 25 seconds flickers and goes out.
The process of updating the firmware, perform the following com…
-
sysupgrade won't flash any other images(luci or ssh). Router reboots back to the same firmware.
I'm open to run any sort of tests on my router to fix the problem.
-
The edgerouter's kernel partition of 3MiB is getting to small for upcoming lts kernel 6.6.
Depending on how the following OpenWrt issue is resolved, we will likely need new factory images for the web…
Djfe updated
2 months ago
-
*Aikhjarto:*
When using sysupgrade with "-k" to include a list of installed packages in the backup, a mounting error is both logged to console and to log.
======How to reproduce:======
Do backup …
-
```
hi
jus to to know if you intend to put a new version of ddserver on the
sysupgrade.bin - v1 and v2...
is easily than install the ipk ( is hard to me get a internet conection or
instal by tftp..…
-
```
hi
jus to to know if you intend to put a new version of ddserver on the
sysupgrade.bin - v1 and v2...
is easily than install the ipk ( is hard to me get a internet conection or
instal by tftp..…
-
```
hi
I've install the new version of openwrt . sysupgrade v 2.0 in two devices (
mr3040 v2) and they bricked.
in one I had the old version of openwrt( downloaded here)..and other was new
one ( …
-
```
hi
I've install the new version of openwrt . sysupgrade v 2.0 in two devices (
mr3040 v2) and they bricked.
in one I had the old version of openwrt( downloaded here)..and other was new
one ( …
-
```
hi
I've install the new version of openwrt . sysupgrade v 2.0 in two devices (
mr3040 v2) and they bricked.
in one I had the old version of openwrt( downloaded here)..and other was new
one ( …
-
# How it works now
At the moment, a upgrade of the system removes every package which was not included in the standard package set.
# How it should be
The updater should preserve/ install the pa…