-
**Feature - Be able to configure a pre flashed Tasmota device with Alice compatible backlog commands**
I think it would be a nice feature in the "My Home" screen that once you've added a device to …
-
I have a couple of LYWSD03MMC and using your code was able to flash the alternate firmware. Using an ESP32 (Tasmota 9.x) as a BLE gateway (sensors are too far from the HA machine) I can see the LYWSD0…
-
**Hi Freunde ;) Wie wärs mit einem Adapter für Tasmota, welcher ohne MQTT aus kommt? Ich habe mit dem normalen Sonoff Adapter sehr oft Probleme (Lampen welche veraltete Werte 100 mal zurück schicken u…
-
Tried on a mini and miniR2. The scipt flashes the firmware perfectly, but after the firmware installation is complete, I cannot see the Tasmota-xxxxxx wifi network in my list.
I first need to do a Fa…
-
Hi,
I have a couple Sonoff S31 modules with Tasmota 5.14.0. With the Tasmota smartthings handler pointed at the device, it seems like the Sonoff module reboots every time the device is queried by Sma…
-
### Describe the bug
The ESP23-S3 boards - I've checked several to be sure - will not flash with ESPresense despite flashing with the similar online flasher for Tasmota. The chip seems to erase and…
-
No sure how feasible or achievable this is, but as the wall plates are so nice, I was looking to use these to control Tasmota flashed lights.
Whilst I can do a little bit of coding, I think this ma…
-
I use DHCP with my Tasmota devices, so their IP addresses will change over time. It looks like TasmotaBackup uses the IP address to identify devices. This results in two issues:
1. After re-dis…
-
Hello,
I have successfully updated my ZB-GW03 with the v13.4.0 firmware.
But it seems that the Ethernet is not activated: When I click on the Informaton button I see the Wifi IP address but not …
-
I found out the problem!
I opened the energy_data.db using 'DB Browser for SQLite.exe' (https://sqlitebrowser.org/dl/) and noticed the value of 'idx' was empty in the entire column. S…