-
### Feature Checklist
- [X] Searched the [issues page](https://github.com/e2nIEE/pandapower/issues) for similar reports
- [X] Read the relevant sections of the [documentation](https://pandapower.rea…
-
### The problem
hello,
I'm running HAOS 13.1 on a NUC12 (X86-64), and I noticed that on reboots of core or host, the processor temperature spikes exactly every 5 minutes as shown here:
 line 184:
` return bytes_toint(self.buf2[0], self.buf2[1]) / 340 + 35 # I think `
Whereas **MPU-6000 and MPU-…
-
### What version of Adaptive Cover are you using?
1.4.3
### What version of Home Assistant are you using?
2024.8.3
### Checklist
- [X] I have filled out the issue template to the best o…
-
### Feedback
Under the Entitäts-ID sensor.aussentemperatur is shown the temperature in the heat pump.
The temperatur of the "Entitäts-ID" sensor.aussentemperature is a temperature, that you can fi…
-
Sure, here's a revised version for better legibility:
I am having a similar problem as the OP.
I flashed the latest version of IronOS, and I consistently experienced overshoots in the temperatu…
-
Hola @ysard, @wrongisthenewright.
This topic for computation temperatures discursion ;-)
Yes, I have read the installer document, about 20 or 25 times... I even generated the translated version …
-
Is it possible with this board to use an external temperature sensor?
I currently have two TZ models. They have a theoretical lowest power consumption of 200W. However, I have only seen it when the…
-
Hello, the temperature is not transmitted accurately. It is always rounded up or down to 0.5 degrees. Is it possible to display the temperature exactly in HA
thx
regards Chris