-
Hey, I'm trying to use stall guard with TMC2209, and a few months ago I used the following example:
https://gist.github.com/metalinspired/dcfe07ed0b9f42870eb54dcf8e29c126
Which published by metali…
-
Hello,
I'm currently trying to drive a stepper motor which drives a linear stage to move something around. I have a fysetc v3.0 TMC2209 connected to a CNC shield v3 which sits on an arduino mega 25…
-
Good day,
I setup an RP2040 with 2x TMC2209 v1.3 (Bigtree Tech) drivers exactly to ( https://github.com/janelia-arduino/TMC2209#connecting-multiple-tmc2209-chips / - Bidirectional Communication / Chi…
-
Hello,
i have a SKR 3EZ, with TMC2209EZ, and a Biqu h2,
when i put the steps per unit in the E0 (biqu h2) is 932 the correct, don´t works good,
trying i get mor o les with 2432 steps in my E0, bi…
-
I have TMC2209 v1.2 drivers connected to Ramps 1.4.
Everything works fine except ability to trigger end-stops using sensor less homing
Can somebody tell how to connect BTT tmc2209 v1.2 diag pin to r…
-
Hello!
My 3D printer configuration: SKR-V2 (BigTreeTech) + TMC2209 (BigTreeTech) working on UART. In Marlin config file TMC2209 drivers set up.
I encountered a problem sometime ago. After the 3D pri…
-
Although in the webbuilder the trinamic drivers are available in the pinout of this board there are the spi pins but CSX CSY CSZ is missing and for tmc2209 no info for the UART ports.
Am I missing …
-
Hello, I'm trying to connect [tmc2209 v3.1](https://aliexpress.ru/item/33027610442.html?sku_id=67201619468) to UART,
jumper in right place, like in manual
![image](https://user-images.githubuserc…
-
Tried to use this with LDO 2504AH on Octopus v1.1 with TMC2209(s) and senseless homing doesn't appear to be working even with a value of 255 the X Axis is crashing into the gantry.
I add `2504ah` t…
-
Compiling with VS code and PlatformIO
I set the
-----------(platformio.ini)
[env:mks_robin2]
platform = ststm32@5.4.3
-----------(configuration.h)
#define Y_DRIVER_TYPE TMC2208
then I …