-
See simple example below.
![image](https://github.com/user-attachments/assets/446c2393-c299-405d-9a64-cd72d6d622ee)
After focusing on textarea, label transits on top as needed, but basically it does…
-
The details of what list will be displayed after entering `progress` command is never specified in the user guide.
I originally expected it to not change the list displayed, but it turns out that you…
-
In batch mode, when the `transits` supplied lie outside the range of the actual lightcurve, LATTE reported failure to complete without stating the reasons.
It'd be nice to show the reasons.
Exa…
-
### Bug report
pharmpy version: 1.1.0
Runs were successful but model.ctl file is missing while the other files are available. there is a weird file with the name model.ppmod
It happened for fit()…
-
EG TOI 1982
| raw data | init fit | phase |
|----|-----|-----|
| ![raw data] | ![init fit] | ![phase] |
- from the left most plot, it looks like there is only one transit bw 23…
-
-
I think that this `ri` variable was meant to be the sky-projected separation to see whether the transit was happening close enough on the sky to approach the stellar radius:
https://github.com/eric…
-
Feature request.
Low thrust modes could work by decreasing propellant mass flow while keeping the same power (thus increasing exhaust velocity and delta-v budget at the cost of thrust).
This way low…
-
#### Issue details
When using a laser altimeter and the "Terrain" option in mission planner, We have found that if the drone transits over water (pond) the drone will enter RTL.
This is due to the r…
-
### Bug report
Pharmpy version: 0.104.0
I have run AMD and specify the MFL:
```
space = "ABSORPTION([FO,ZO,SEQ-ZO-FO]);ELIMINATION(FO);LAGTIME([OFF,ON]);TRANSITS([0,1,3,10], DEPOT);PERIPHERALS(0…