-
The only time miner tried to increase unlock level is from the start, but even after long period on stable work on 98% it did not raise to 99%
Also considering that on 100% my hardware is not stabl…
-
Hello. I believe there’s to be an issue with this algorithm. While mining Sero coin the miner likes to time out and immediately reconnect to the pool. This happens in all pools so it’s not pool relate…
-
im not getting anywhere with this dual mining seems like i get 60mhs for ergo then 12 for eth and then it goes up and down. whats the best settings for a 3060ti or is it better to just mine daggerhash…
-
20210804 05:50:27 TREX: Can't stop device [ID=2, GPU #2], cuda exception: CUDA_ERROR_LAUNCH_FAILED, try to reduce overclock to stabilize GPU state
I keep getting above error. I’ve reduced overclock…
-
2 of my 3 rigs end up crashing or freezing when running 0.25.12, usually near the 24 hour mark.
I've tried lowering overclocks, core clocks etc. but it still freezes
I cooled the room down to have…
-
I have 2 gpu in my gamer pc, the RTX 2070 in a pcie x16 like the "default gpu" (i configured this in nvidia control panel) and a RTX 3080 LHR in a pcie x1 of the same motherboard... My problem is this…
-
I mine for around 2 mins then it crashes idk what causes it. I have a 3080 suprim x, temps sit around 50c, -200 core clock +1300 memory clock , pl 63 , 74 temp limit, fan speed 80, around 100m
![cmd_…
-
Hi, my video card unexpectedly unlocked when I decided to lower the memory frequency a little, after a reboot everything went off. How can this be explained.
![3060](https://user-images.githubusercon…
-
Hi everyone!!
I have the problem that only with the MSI gaming X 3060 ti lhr, they give low hashrate.
The gpu "2" generates 37.7 - 38.6 mh / s at 125 - 130 watts with the following settings: --lhr-t…
Rodkl updated
2 years ago
-
### Is there an existing issue for this?
- [X] I have searched the existing issues and checked the recent builds/commits
### What happened?
After some time after starting the sd extranet proc…