-
This is a list of known issues especially blockers for the 4.1.0 copter release. (also see [Rover-4.1](https://github.com/ArduPilot/ardupilot/issues/17116), [Plane-4.1](https://github.com/ArduPilot/ar…
-
**Is your enhancement proposal related to a problem? Please describe.**
Currently the modem implementation connects to a network before booting the main application and stays connected forever.
This…
-
Problem: esp32 does not connect to LTE (but it does connect to GPRS!)
In the code, esp32 fails to get network (modem.waitForNetwork() line)
Modem Name: SIMCOM SIM7000G
Modem Info: SIM7000G R1529
C…
-
I'm trying to use `NeoHWSerial` with `NeoGPS` on an `esp32cam` board. I'm a bit confused which version I've got but it was installed with:
```
C:\Users\Mat\Documents\Arduino>arduino-cli lib install …
-
A few Android devices are unable to successfully establish a bluetooth connection to the Raspberry Pi 4.
The devices connect, and after 5 seconds, it is disconnected with a timeout reason code 0x08.
…
-
The ESP32 Core for Arduino 2.x is the most recent major version currently recommended for use with PlatformIO. The decision to discontinue support was made by the Espressif company, as indicated in th…
-
Using NetworkClientSecure has obvious benefits, but it's consuming a lot of RAM. Is there any way to push NetworkClientSecure (aka TLS) to PSRAM?
-
If I create a new project for an "Arduino Nano 33 BLE" and create test variables of the "stdint" types, I get the following situation:
I'm surprised that other users haven't encountered this a…
-
I've a Omnibus F4 Pro (V3). Two months ago I added a Radiolink SE100 (M8N + HMC5983) to my quad. It worked perfectly but after some hours the hardware was dead, I don't know why. I bought another, the…