-
Koenkk mentioned requires new znp firmware projects from a newer SimpleLink SDK so wonder if compatible with zigpy-znp?
https://github.com/Koenkk/Z-Stack-firmware/discussions/476
Back-story; SML…
Hedda updated
3 months ago
-
I have two USB WiFi adapters. One acts as the AP and one connects to the WiFi network with internet access. In this case I'm using my homes WiFi. This is using the Raspberry Pi Model B.
I run the fol…
-
The Realtek RTL8822bu is listed in your table with a USB3 / 5 Gbps Interface.
According to www.realtek.com/en/products/communications-network-ics/item/rtl8822bu the "Host interface" is "USB2.0 fo…
-
Hi there! After spending many hours going through drivers, I finally thought to just search Netgear A6100 in github, and saw this as being the most up-to-date. It works! Thanks for your great work!
-
Not sure if any of you own the newer ZiGate-Ethernet (wired gateway with PiZiGate) or the older ZiGate + WiFi Pack (wireless bridge for ZiGate module) but please consider discussing and brainstorming …
Hedda updated
2 years ago
-
I looked at [morrownr/88x2bu-20210702#42 ](https://github.com/morrownr/88x2bu-20210702/issues/42) and used [8814au.tar.gz](https://github.com/morrownr/88x2bu-20210702/files/8403712/rtl8814au.tar.gz), …
-
See: https://www.asus.com/nl/Networking-IoT-Servers/Adapters/All-series/USB-AC68/HelpDesk_Download/
I have a ASUS USB-AC68 WiFi-AC1900 adapter with high wireless internet speed. Would love to use …
-
I have posted an example hostapd.conf for WiFi 6 for mt7921au based USB WiFi adapters:
https://github.com/morrownr/USB-WiFi/blob/main/home/AP_Mode/hostapd-WiFi6.conf
There is also a link on the …
-
Hi,
I just bought the Comcast CF-953AX for use with my Arch setup.
When I plugged it in and ran ip link, I saw no new interface.
I then tried lsusb. Nothing there as well.
Upon running dmseg, I go…
snod4 updated
2 months ago
-
```
On the front page it mentioned that if there are any drivers from linux to be
ported to mac to request it here.
On the surface pro hackintosh the only thing not working for the community is
th…