-
### Describe the bug
This is the documentation of the `program_rpiboot_gpio` option:
https://github.com/raspberrypi/documentation/blob/develop/documentation/asciidoc/computers/raspberry-pi/bcm2711-b…
-
Hi - I have a Seagate 440 NAS that I would like to try your latest codebase on. Happy to provide my findings here. Is there anything I should be checking beforehand?
-
The application's testing process revealed that text retrieved from the serial board is exhibiting fragmentation and missing segments. A sample of the flawed text is provided below for reference.
```…
-
U-Boot SPL 2016.09-rc1 (Oct 01 2016 - 21:31:35)
init i2c
rand test 0 MB RW, err cnt = 0
DRAM: 512 MiB ~
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
sunxi_board_init ok!
Trying to boot from MMC1
mmc_dev=0
…
-
### Describe the bug
Following the instructions precisely I get this:
```
cmyk@MBP usbboot % make
make: `rpiboot' is up to date.
cmyk@MBP usbboot % sudo ./rpiboot
RPIBOOT: bui…
cmyk updated
8 months ago
-
I installed the latest 64-bit Raspberry on an SSD connected to a Pi4. All went well and I was able to make a lot of progress getting everything set up.
This I installed the DeskPi software:
cd …
-
It's not possible to enter [FEL](https://linux-sunxi.org/FEL) through holding **RESET1** button and the powering up with the USB cable connected to the USB-OTG.
Using the UBOOT1 button seems to pre…
-
The ps4 camera has two HD RGB cameras a fixed distance apart:
.
I couldn't make out any uart rx/tx pads. The processor is a Aml…
-
Trying to flash a CM3 from a Pi B+ (Jessie), I found that the rpiboot was repeatedly failing
```
Waiting for BCM2835/6/7
Sending bootcode.bin
Successful read 4 bytes
Waiting for BCM2835/6/7
S…