-
Hi, i'm trying to color the led stripe of white color and i found this code:
```
import time
from neopixel import *
# LED strip configuration:
LED_COUNT = 30 # Number of LED pixel…
-
I try to use a WS2812B of LCSC.com and only works RED. I check the signals with my oscilloscope an I can see that the FastLED library sends 32 bits. The LEDS WS2812B using only 24Bit in this configura…
-
I've been trying to get the blink sketch running on a Trinket M0 but have so far been unsuccessful. Output from pin 1 is buffered to through a 1g126 to 5V. The same setup works just fine with the Neop…
-
Hello! I decided to work again in a old project with the WS2812B and noticed that after updating the libraries, the first led started blinking randomly. I could isolate the problem. It happens only wh…
pla10 updated
2 years ago
-
### Feature Request
LED support in the LCD.
So i got it to work. Problem is now that there is no LCD control for it . But marlin code is working. I use a WS2812B Strip.
https://nl.aliexpress…
-
Thinking about reducing boilerplate as in #114, I would like to propose the inclusion of arrays and iterators to the language
In the below example, I create a chain of 16 ws2812b LED's and connect …
-
Current plan: 11x44 Pixel Scoreboard, 484 pixels total.
484 LEDs - power needed?
Using 2x WS2812B LED Strips from BTF-Lighting
-
Hello @ all !
I try to use RGBW LED Strips with almost identic Chip to WS2812B, but i cant make it work. The correct Name of the Chip is SK6812. I try to use a fix in the FastLED Libary to make it…
-
How do I use Ambibox's Ambi LED mode in Prismatik?
SP616E + WS2812B is available in Windows as Ambibox + AmbiLED.
Only Prismatik is available on OSX, but Adalight and Ardulight do not work.
-
Can an external trigger be implemented through GPIO, for something like a paddle switch or button or even PWM for full auto? I'm gonna wear out my ok button playing this game lol