issues
search
andrivet
/
ADVi3pp
ADVi3++, an alternative and better firmware for Wanhao i3 Plus printers and clones. Fork of Marlin Firmware.
https://community.advi3pp.com
GNU General Public License v3.0
244
stars
118
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Fix preheat presets fan speeds
#348
taligentx
opened
1 week ago
0
LCD UI elements consistency adjustments
#347
taligentx
closed
2 weeks ago
5
In the Move panel, the E- button does not work
#346
andrivet
opened
3 months ago
0
To be able to cycle back and forth between the first and last setup screens on the temperature presets
#345
MauroGil66
opened
6 months ago
0
Leveling state is not restored after homing
#344
andrivet
closed
6 months ago
1
X-Twist compensation is broken
#343
andrivet
closed
6 months ago
1
Synchronise sources with Marlin 2.1.2.2
#342
andrivet
closed
6 months ago
1
merge upstream
#341
fexofenadine
closed
7 months ago
0
With some LCD panels, the text does not appear correctly
#340
andrivet
opened
8 months ago
0
Be able to set the bed temperature in the leveling screens
#339
andrivet
opened
10 months ago
0
When a M0/M1 command is sent, the LCD display does not have a button to resume the print
#338
andrivet
closed
11 months ago
1
Manual Leveling does not check bed temperature and does not home
#337
andrivet
closed
1 year ago
0
Add support for M593 - Input Shaping
#336
andrivet
opened
1 year ago
0
Tuning Extruder: the flowrate is incorrect
#335
andrivet
closed
1 year ago
0
Extruder tuning - measurement image missing 5.7.x
#334
MrSJDDevelopments
closed
1 year ago
2
Support of M305 - User Thermistor Parameters
#333
andrivet
opened
1 year ago
0
SD card sorting is not working as expected
#332
andrivet
closed
1 year ago
1
Create main.yml
#331
fcolasuonno
closed
1 year ago
0
Specific sequence leads to catastrophic failure
#330
andrivet
closed
1 year ago
1
Add a way to cancel Load and Unload filament
#329
andrivet
closed
1 year ago
1
For some users, Homing X, Y or Z is stuck on the "Homing..." screen
#328
andrivet
closed
1 year ago
1
For Mark II printers, select by default the Mark II offsets for the probe
#327
andrivet
closed
1 year ago
1
Synchronise sources with Marlin 2.1.2
#326
andrivet
closed
1 year ago
1
unable to access documentation on https://manual.advi3pp.com/
#325
Clumsy-Coder
closed
1 year ago
1
For some users, Load and Unload commands get stuck on Please wait screen
#324
andrivet
closed
1 year ago
1
SDCARD_SORT_DATE breaks SDCARD_RATHERRECENTFIRST
#323
github138
closed
1 year ago
3
Save the last temperature used to Load/Unload and restore it on boot
#322
andrivet
closed
1 year ago
1
Live Z Adjust during print
#321
wnsander232
closed
1 year ago
4
BLTouch Testing: when choosing "Yes Slowly" on the red LED blinking step, the instructions are contradictory
#320
andrivet
closed
1 year ago
0
Use Touch Switch Mode (SW) for BLTouch
#319
andrivet
closed
1 year ago
1
Thermal runaway error is not always displayed on the LCD screen
#318
andrivet
closed
1 year ago
1
G-Code M114 response breaks Octolapse
#317
Damien0505
closed
1 year ago
3
Do not cooldown immediately when Unloading filament
#316
andrivet
opened
1 year ago
0
Beep in Preheat when the target temperature is achieved
#315
andrivet
closed
1 year ago
6
Apply the setting under Settings / Beeper / Beep duration to M300 without P argument
#314
andrivet
closed
1 year ago
1
Cancel automatic leveling
#313
andrivet
closed
1 year ago
1
Detect and prevent bounces
#312
andrivet
closed
1 year ago
0
Restore Z-offset in Sensor Settings
#311
andrivet
closed
1 year ago
0
Add steps in BLTouch Tuning for cases when the BLTouch is blinking red
#310
andrivet
closed
1 year ago
1
Print Settings panel changes take effect immediately
#309
DimitryNechaev
closed
1 year ago
1
Update description of Print Settings panel
#308
DimitryNechaev
closed
1 year ago
2
Versions over 5.0.3 having issues accessing SD card files
#307
DimitryNechaev
closed
1 year ago
3
Fast probing with BLTouch
#306
andrivet
closed
1 year ago
1
Aldi Balco 3D Printer (model HE180021) - BL Touch installation wiring Image is incorrect
#304
MartynWilliams
closed
2 years ago
1
Option to enable fast probing using bltouch
#303
MartynWilliams
closed
1 year ago
1
Updated manual - Link to filament sensor not working
#302
MartynWilliams
closed
2 years ago
2
Introduce PROXIMITY_PROBE setting and build env for switch-like
#301
SteffenKockel
closed
1 year ago
6
Revert "Update change logs and release number"
#300
astrof
closed
2 years ago
1
The computation of the Extruder Tuning is wrong
#298
andrivet
closed
2 years ago
1
The firmware does not take into account arguments for the M300 code
#297
andrivet
closed
2 years ago
1
Next