-
adjtime() is the semi-standard method used in NuttX, Linux, and FreeBSD to gradually adapt the system time so that it is in agreement with RTC time. It differs from clock_synchronize() or clock_resyn…
-
Im getting a strange result... I have three JBD 100amp BMS', all with the same firmware rev (20). Im running the python code on a 3b+ that is sitting roughly 10 feet from one of my BMS' and maybe 8 fe…
-
After setting up the PIN for the BMS (using battery manufacturer’s app) this app’s config button has no longer an action. It just goes back to the main screen. If I enter a wrong PIN it shows a error …
-
![A8315A8E-4794-4E3F-AAE8-322DA7FA9186](https://user-im…
-
I currently have a 4c 12v totaling up to 280Ah but the bms is only saying 100Ah on display.
-
Hi
After updating to v1.3.0 the app no longer shows cell voltages and there is also information missing in the BMS Infos field
![1E0DC5E2-F611-407E-93B7-D2C422FA7DE4](https://user-images.githubuse…
-
I have many BMS' and they all have names stored on them. When I launch the app I see a list of generic names which makes it difficult to connect to a target BMS. And the MAC addresses displayed on the…
-
Hi,
I installed the app, connected to my Liontron 200ah and pressed the on/off buttons in the overview screen. The BMS turned power and charging off, and kept spinning afterwards. After restarting …
-
Hi,
I having some problems with connecting my bluetooth module to the Xiaoxiang BMS IOS app. When i try to connect the the blueooth module with the IOS app then the App doesn;t send any data reques…
-
Hello
I used the offset mode to search some modification with the default setting. But how I evaluate the modification localization? For instance, the PTMiner calculate a probability for the loca…