-
### Problem description
Hello good afternoon! I recently bought this solar siren from aliexpress, very well built product, however I couldn't get it to work within the ZHA, I checked and found a su…
-
### What happened?
After updating to 1.36.1 all my hue wall switch modules (Philips 929003017102) show strange behavior:
- short press of button results in four actions: left_press, left_press_rel…
-
### Problem description
I bought [this](https://www.aliexpress.com/item/1005005893945826.html) motion sensor from Aliexpress. It seems to be detected and "successfully" configured by ZHA but it doe…
-
### Problem description
New Namron Zigbee Touch Termostat 2.0 is identified as TS0601 by _TZE204_p3lqqy2r with no controls or diagnostic.
https://www.namron.com/products/namron-zigbee-touch-term…
-
### Problem description
The device is detected and connected in ZHA, but has no objects
### Solution description
Is it possible to fix this somehow
### Screenshots/Video
Screenshots/Video
[Pas…
-
### Problem description
Please add support
### Solution description
Support to be added.
### Screenshots/Video
Screenshots/Video
[Paste/upload your media here]
### Device signature
Dev…
-
### What happened?
Hi
I experience many strange problems and it properly is connected some how.
1=Zigbee2mqtt stop responding and require a restart (2-3 times a week)
2=Sometimes it is very slow…
-
### Problem description
Paring went smoothly but I don't see any sensors or entities
### Solution description
Sensors and entities to display power in W and energy in kWh
### Screenshots/V…
-
### What happened?
I am using a UZG-01 device via PoE. Tthe Z2M docker gives the following error after 1h 59m 55s and does this repeatedly after that amount of time over and over:
I did a conti…
-
### Problem description
Movement detection and illuminance work fine. Temperature and humidity only get reported at pairing. Device should report both when a change occurs.
### Solution description
…