-
Problem:
Marlin hangs.
Steps to reproduce:
In Configuration.h enable:
```cpp
#define X_DRIVER_TYPE TMC2130
#define PSU_CONTROL
#define AUTO_POWER_CONTROL
```
In there is no connection wi…
-
Hi,
So I'm currently trying to replace my Creality CR10 S5's motherboard with a SKR 1.4 Turbo. I purchased this along with TMC 2208 v3 Drivers. So far I've got most things working, from the motors …
-
```
Marlin/src/lcd/menu/menu_delta_calibrate.cpp: In function 'void _man_probe_pt(const float&, const float&)':
Marlin/src/lcd/menu/menu_delta_calibrate.cpp:42:76: error: 'DEFAULT_XYZ_STEPS_PER_UNIT…
-
Done
### Bug Description
I am making a testing rig. It is simply a stepper motor (nema 17) connected to a controller (ESP32 Wroom 32D board) through a stepper driver (TMC2130).
As I was una…
-
I check vfer to adjust but there is no voltage across the driver, attached is a picture of the pins for MS1,MS2,MS3 and D. Marlin setting changed drivers to drv8825. need help thanks. I checked VCC…
-
### Description
1. [Print any Gcode with dimensions bigger than 20x20 cm]
2. [Wait for hanging SKR board - either in G29 or first layer]
3. [if it will survive somewhat 3rd layer it mostl…
-
Any value other than 0 for TEMP_SENSOR_BED causing halt and restart board with ramps-fd+due combo+tmc2130. Newest bugfix 2.0. Below log.
Log Output
```
> start
> echo: Watchdog Reset
> Marlin…
-
Hey there, in the past I often tried to switch to Marlin 2.0 from 1.1.9 but there was always some hinderance.
Eventually I managed to sort out most of it (last was the motor knocking noise where you …
-
I bought a laser FROM EBAY in this link
https://www.ebay.com/itm/450nm-15W-Laser-Module-W-Heatsink-Fan-Support-TTL-PWM-for-DIY-Laser-Engraver-J/222755022085?epid=2228220880&hash=item33dd3be505:g:gJg…
-
I have been testing the latest bigfixes on 2 machines here. One is a Tornado running the stock board and the other is a custom machine with a RAMPS board in it. Since switching the custom one over to …