-
Hi, I found that the access to the database from China is not possible. When opening the file Altium hangs for a long time to the point it stops working. If the db is installed as a library, when plac…
-
Hello!,
I don't need the LCD driver support, so I was wondering if there was any issues about using the STM32L151, with the existent image for the '152? Do I need to make any changes?
Thanks as …
-
I'm assuming that the SERDES we want to test are the ones on the east and west sides of the chip,
LINK_BM_TX_1_{P,N}, LINK_BM_RX_1_{P, N}, LINK_CM_TX_0_{P,N}, LINK_CM_RX_0_{P, N},
LINK_BM_TX_3_{P,N}…
-
Same general comments apply as Precharge review, so I won't repeat myself (too much) here. Check through that list as you work through issues presented here. Especially the housekeeping stuff.
**3D …
-
### Link Checker
Errors were reported while checking the connectivity of links.
```
hardware/edgeconnector_ds.md
OK ../edgeconnector
LICENSE.MD
OK https://creativecommons.org/licenses/by-sa/4.0/
OK…
-
Why is it that after downloading the project, the schematic diagram shows the memory size, but it is blank when opened with Altium Designer2019? Thank you ever so much!
ZSIRS updated
4 years ago
-
First I want to say thanks for this project. I can't wait to see the library grow bigger and bigger.
Now to the problem:
I noticed that sometimes when selecting components it would get stuck f…
-
### Link Checker
Errors were reported while checking the connectivity of links.
```
accessories/making-accessories.md
OK /docs/accessories/assets/making-accessories-d7c25.png
OK /hardware/edgeconnec…
-
Could be interesting the installation as a PCBNew plugin, allow the check of the current PCB with other file.
-
If you use Altium to generate a BOM, it works great, but many part numbers are for Digi-Reel packaging. Also, a few of the parts are unavailable on Digi-Key, but in reality, they are there just with a…