-
### PROBLEM DESCRIPTION
When using Shelly Plus 1PM with Tasmota 14.2.0.6 (6fa38e4-solo1) there is no reaction to KNX command after some days. After restarting the device via Web-Interface everyth…
-
I decided to create this issue to keep from spamming #10.
The only place I was able to find the EDID was in the CODE region. RAM and EEPROM did not seem to contain the EDID.
The following return…
-
Hello first of all TKS a lot for this repo.
I'm wondering if it would be a pain to add PY32F0 series tool (Cortex m0+) with SWD interface?
I want a small tool to program this MCU to add this tool to…
-
You recently added my design suggestion with a gear arm.
(https://github.com/hiveeyes/hanimandl-hardware/tree/main/variants/variante-5_dresden)
In order to be able to use this design, the option…
-
Edit: how to update EC to be in sync with firmware version?
~flashrom needs to support ite_ec programmer to be able to flash ec firmware internally on nv41~ edit: flashrom only supports proprietary …
-
Hello,
I'm trying to use BBBlfs to flash my Beaglebone Black but I am not able to do it.
The issue I have seems similar to what was reported on IRC here: http://logs.nslu2-linux.org/livelogs/beagle/…
-
Hello,
Lately I've been trying to install the provided code on a D1 mini with a PN532 board. In the past, I have been successful on breadboard but now that I want to use a more permanent package (u…
-
Hi,
i tried to flash a Atmega328pb. The MCU runs at 12MHz. I used the MiniCore opiboot Botloader at 56700 Baud. The upload to the MCU in the Arduino IDE with a FTDI USB-Serial-Converter works as expe…
-
brom dump here
[https://github.com/CoolDUp/MTK-brom-dump/blob/main/mt6853.dat](url)
-
Flashed Release 9 onto a 32GB SD card. System boots and is functional, though as noted in the release notes, the partition is not automatically resized.
However, while I am able to successfully res…