-
Hello,
I've connected UART from Caddx Vista to RX1 and TX1 on my FC via connector. I've tried to connect Vista to UART3 also, but no effect. When I use advanced serial configuration in GUI and set …
-
Hi there,
Is it possible that you can provide the calibration sequences also in ZIP format and not only in the Rosbag format like the rest of the sequences? I know that you can always convert from …
-
Has anyone been able to manually install EZ Wifi Broadcast onto Emlid's Navio2 image? I've been struggling researching this. The Navio2 image now no longer comes with the original WBC, so I was wonder…
-
```
Items used...
SPECS...
Martinez v3 Board (FPV Community)
Firmware 48
RCTimer Gimbal
2212 Motors
Yes, the sensor is UPSIDE DOWN. (Seeing I am on v48)
GoPro Hero2
All Balanced without power
Setting…
-
If the software could set all 6 modules, to the same Rx frequency and select the strongest output, via a video switch f.i. 2x CD4066, the unit could be also used as a long range multi diversity basest…
-
The gyro is not working Darwin fpv Baby ape pro
*** Support data submitted ***
Id: "86716205-195b-4309-a8c6-cebfa073e3c1"
-
Using M210, M200, Inspire 2 you can select the video streams you wish to receive, and listening on DJIVideoFeedSourceListener gives you info on the available streams.
I need a way to connect the vid…
-
Is Frame Orientation "V" supported in 3.0.1 R3?
icsss updated
10 years ago
-
Might be barking up the wrong tree with this but ive been told that running the below command from the comm_og_service_tool.py tool may clear the error
So I issue the command python comm_og_service_…
-
### Feature proposal
Mavlink has some builtin messages for controlling camera and reporting its status.
If proper messages will be passed through wfb, then we will be able to get following featu…