-
it seems that most changes are only changes in position:
https://github.com/simonw/scrape-fediverse/commit/39289e5dca2317ccc4ee349cd7f2683492c48074#diff-071b14917c54c9b8d44c969759d24031b104a86fbf50…
-
I was trying to compile enhanceio on 4.3 without success.
There's problem caused by [this commit on kernel](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/include/linux/bio.h?id…
-
I'm creating this issue to collect information about possible solution for a flash translation layer for CircuitPython. While the flash memories CircuitPython boards normally use have a reasonably goo…
-
The docs (https://tinygo.org/microcontrollers/esp8266/) list that the ESP8266 WiFi feature is not supported by TinyGo.
Imo having this support is crucial for this board to make sense. What needs to…
-
How would you recommend driving a motor using the Maker Pi Pico base? I'm interested in controlling [this peristaltic pump](https://www.adafruit.com/product/3910). Or is there something other than the…
-
Lately I have been suffering from too much sitting down.
I spend around 12 hours at my desk each day and it's been causing me pain.
I won't _bore_ you with details, but if you're interested, read…
-
Hi,
Klipper is probably 3D printing's most advanced firmware.
It is a two part system where the hard math is done on a real computer, and the real time stuff is done on a microcontroller.
A s…
-
# Installing SpotifyPod (The code is modified for [Ricardo's Alternate Build](http://rsflightronics.com/spotifypod))
## What you need to do before installing SpotifyPod
### You need raspberry pi li…
-
Not a bug, not a feature request anyhow.
I do understand very well it's a work in progress though I cannot understand how you sized/scaled your model.
Is it for shrinkage or any other reason?
In …
-
Currently, If two clicks are needed for a single movement. `mt32-pi.cfg` has this information:
```
# Set the rotary encoder type (if used by control scheme).
#
# Different rotary encoders may co…