-
Is there a simple way to install Pyrealsense2 on Jetson Xavier agx ?
I tried ALL the solutions proposed on this forum but nothing worked: the problem is with the python wrapper.
The problem seems to…
-
Hello,
I am using a Jetson Xavier NX development board for my project. The power mode I set is "Mode 20W 6Core". I am using Arducam-IMX219, which are natively supported. I have built and run the do…
-
I followed the setup-guide-mk1c.txt to install MinKNOW on Jetson Xavier NX. However, after plug my MinION mk1c device to Jetson, nothing happened.
Refer to #17 , I tried to run `sudo /opt/ont/minkn…
-
环境:jetson xavier nx,cuda:10.2 cuDNN: 8, jetpack: 4.5.1(最新)
下面截图是 import paddle.fluid as fluid 的结果:
image
下面截图是 运行 fluid.install_check.run_check() 的结果:
image
下面截图是运行 python ppdet/modeling/tests/te…
-
I used docker to deploy deepstream=6.2, and used four video streams as input for detection. The model used is yolov8s,batchsize=8, fp16. When the batchsize of streammux in config is set as 4/8, while …
-
Hello,
I've been working on the Xavier NX (eMMC) version of my embedded project.
`mender install /data/myupdate.mender` executes without error. I then commit using `mender commit` and reboot.
…
-
I try to build the project. However, it shows that isaac_ros_test is not finished. Any suggestions to solve this problem? The error logs are shown below.
In my case: Jetson AGX Orin 32GB. The host us…
-
Hello friends,
I have a livox horizon integrated with jetson xavier nx and an adis16470 imu data from " CUAV X7 Pro" ,
and using PTP time synchronizing method.
Problem 1 : when scanner installed o…
-
----------------------------------------------------------------------------------------------------
| Required Info | …
-
Please update jetson-stats with new jetpack
**Linux for Tegra**
- L4T: 35.1.0
**Jetson-Stats**
- Version: 3.1.4