-
Typo
/home/x/LinuxCNC_ArduinoConnector/LinuxCNC_ArduinoConnector.ino: In function 'void reconnect()':
/home/x/LinuxCNC_ArduinoConnector/LinuxCNC_ArduinoConnector.ino:625:25: error: 'Inputs' was no…
-
Hello,
When creating an endless axis, I was unable to enter the required value (-1e99).
Dokumentation:
[linuxcnc.org/docs/2.7/html/config/ini-config.html](http://linuxcnc.org/docs/2.7/html/c…
-
### Version
2.1.7
### Hardware / Firmware
GRBL 1.1
### What happened
> Report syntax error on valid number when opening nc file.
![image](https://github.com/winder/Universal-G-Code-S…
-
RIP 2.9 Branche
Debian Bookworm
Oracle VM VirtualBox
I added my own box_dro_side in Gmoccapy:
INI file:
EMBED_TAB_NAME = Axis load
EMBED_TAB_LOCATION = box_dro_side
EMBED_TAB_COMMAND = gladev…
zz912 updated
8 months ago
-
In master branch:
Using a qtdragon sim, after startup, any tool can be loaded. if you edit the tool parameters in qtdragon's builtin tool editor, then you can not load any tool.
you get an error s…
-
I am looking at the code and wondering how do we remove as much processing as possible without putting the burden somewhere else, except on the main computer actually sending the data for the motion c…
-
I'm playing with the ESI data a bit more, and discovered that it's not *that* hard to group mostly-identical devices together based on the PDOs defined. Beckhoff publishes a distinct ESI for each rev…
-
Hello, I based on xenomai+linuxcnc+igh, the test found that when executing 1.halrun 2.loadusr -w lcec_conf./*.xml 3,loadrt lcec, the following error will be reported when executing the third step call…
-
If I understand correctly, using this configuration makes necessary to use `M600` and not `M6` to change tools, or am I missing something on the config?
-
## Here are the steps I follow to reproduce the issue:
1. andy@file03:~/linuxcnc-current/src$ ./configure --disable-build-documentation-translation --with-realtime=uspace --enable-non-distributab…