-
On a clean install I set zone0 for the ds18b20 and apply.
temp works
Tthe first time I enable MQTT settings it gets stuck in a loop
MQTT pub state func{"status":"online","power":true,"brightnes…
-
We should embed measurements into the code and send analytics to our side.
Metrics reporting must be optional and turned off by default in production build (see #77).
Metrics should cover various …
-
Temperature and open/close works, but I bought it primarily for the vibration sensor - any idea how I can get that working? Also, Home Assistant thinks it’s a moisture sensor - any idea how I can fix …
-
Hi,
I have telegraf agent report metrics data to ELK 5.2.1
Doc in ES/Kibana looks like this:
======================Kibana copy/paste=============
```
@timestamp June 12th 2017, 14:13:00.0…
-
I created an SNMP agent to connect to a weather measurement device.
I set to host and port address(not bind host and bind port) and I connected to the device.
but when I use a weather asset as a chi…
-
* Is there any research about the whole impact of mobile devices vs towers vs
datacenters on carbon emissions?
* Any studies about aggregate power draw of a few billion mobile devices?
* Possibly…
-
Can you change something so that when you disconnect it will continue to be displayed.
-
If it is turned on then a workout automatically starts after we select the KayakPro. After the workout is stopped the spin down fails, the weight input can already fail, then sometimes the device disc…
-
I want to use a logic analyzer to measure the relevant timing parameters:
1. The time to initialize the DS18B20 and monitor the online information
2. The time to wait for the DS18B20 to release the …
-
I've taken some rough measurements of how long `emokit_read_data_timeout` and `hemokit-dump`'s main loop take per iteration.
For this I modified:
``` c
int emokit_read_data_timeout(struct emokit_dev…