-
Support automatic restarts. Raw notes / requirements copied from gitter to here:
- Restarts should be on day 7 for g5 and day 10 for g6.
- Don't waste 3 days of a coded no-cal start.
- Restarts s…
-
I'm testing test_powersupply_readings.robot
It is necessary to read powerinputwatts and poweroutputwatts, but I refer to the correction of the issue and set LABEL_power1=psu1_input, which contains …
-
Some fightstick users prefer the feel and tension options of the Seimitsu LS40 over the Sanwa JLF. Investigate what it would take to support this joystick and experiment with it, in case users are int…
-
```
What steps will reproduce the problem?
1. When the the temperqature drops below zero the sensor gives wrong readings
See: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1289330809/0
What is the…
-
The group of sensor_reading routes should be used to get/manage new sensor_reading entries to the db. The endpoints should include the functionality to retrieve:
- sensor readings (with limit & off…
-
Include battery_status in notifications
-
**Describe the problem you have/What new integration you would like**
I have 4 xiaomi_lywsd03mmc temp / humidity sensors scattered around my house. I currently optimize their locations by moving …
-
**Summary:**
While using library for AS7341 sensor I have noticed that I2C HAL sometimes fails and returns HALL ERROR. That is problematic as at that point I cannot send commands to sensor and thi…
-
Support for showing temperature of (at least) following AMD chips is missing when using `acpitemp`:
- [ ] [Phenom2 quad-core](https://forums.debian.net/viewtopic.php?t=74938)
- [ ] Ryzen 6 764OU
…
-
my SD card got corrupted, so I have to start over.
Fresh Bullseye install, following the instructions here:
https://github.com/rstrouse/nodejs-poolController-dashPanel/wiki/nodejs-poolController…