-
[P3481R0](https://wg21.link/p3481r0) Summarizing std::execution::bulk() issues (Lucian Radu Teodorescu, Lewis Baker, Ruslan Arutyunyan)
-
I cannot figure out which pins to set for the reset script.
spi and i2c are enabled.
tyro@rpiz:~/LR1302_loraWAN/LR1302_HAL/sx1302_hal/packet_forwarder $ ./reset_lgw.sh start
CoreCell reset thro…
-
**Reported by manuelbi on 2006-08-15 20:53 UTC**
Currently, the LEDs are hardcoded in openMSX. But LEDs
are part of the MSX hardware and some hardware has
other types of LEDs than other. (E.g.: turboR…
-
**Reported by edwinv on 2005-03-15 20:56 UTC**
When a modeswitch is done while a blitter command is
still in progress, things mess up. OpenMSX emulates
this by stopping the blitter command. However, a…
-
**Reported by bifimsx on 2004-02-15 13:23 UTC**
I was asked to check the cycle speed of the _MWP
menu on MSX turbo R GT (_HIRO on MSX turbo R ST)
between the yellow and the green color. The speed wa…
-
**Reported by sd-snatcher on 2010-12-01 22:33 UTC**
The GRAPH and CODE keys of the emulated machine isn't working as expected. It can't produce most of the desired characters. Only a few keys produce…
-
**Reported by manuelbi on 2009-12-02 22:05 UTC**
The (PSG) bassdrum in SD Snatcher sounds very deep and snappy, while the sound in openMSX is very dull.
Attached a ROM image which only replays that b…
-
**Reported by grauw on 2014-07-23 17:41 UTC**
Currently, the limits on accessing the I/O of the OPL4 are not emulated.
The limitations are described on page 8 of the application manual:
http://map.g…
-
**Reported by grauw on 2015-02-22 18:05 UTC**
As reported by Xyz_39808:
“OpenMSX psg is really broken when it comes to the hardware envelope. It plays like 3 times louder than could be possible even …
-
[P3125R0](https://wg21.link/p3125r0) Pointer tagging (Hana Dusíková)