-
### PROBLEM DESCRIPTION
There are many closed issues with the context of special characters in the Wi-Fi password, e.g. #9153, #5231 or #5010. The documentation only says, not to use "special cha…
-
### What happened?
No button press actions are displayed in the state window, or passed to HA when in decoupled mode. Seen various previous reports of this, for this device and similar Aqara light sw…
-
### PROBLEM DESCRIPTION
I have the [Feit Electric Smart Dimmer](https://templates.blakadder.com/feit_electric-DIM-WIFI.html). As noted in some [other forums](https://community.home-assistant.io…
-
I have my Sonoff Pow's set up as energy monitoring only. I disable the switch and leave them as always on.
I've been noticing for a while weird things happening when I upgrade the firmware on my wi…
-
### PROBLEM DESCRIPTION
DS18x20 does not work out of the box using parasitic power. Looking at the source, a critical line of code seems to have been commented out.
### REQUESTED INFORMAT…
wrlaw updated
8 months ago
-
I managed to successfully flash the YTF IR Bridge with Tasmota.
If I send a IR Code from a IR Remote it is successfully received by the Bridge:
`19:38:40 MQT: tele/sonoffIRBridge_1/RESULT = {"IrRec…
-
Upgraded firmware to 3.3.0 using eWelink app.
Added the DIY jumper. Created a sonoffDiy network hotspot on my mobile phone.
I can connect to the device and get details
`http://192.168.43.24:…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
When applying example Berry code from docu an error shows up:
```
import animate
var strip = Leds(24, gpio.pi…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
Sonoff ZBPro with ESP32 random crash when enter to main menu page.
### REQUESTED INFORMATION
_Make sure your…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
The "buzzer" function remains active on a GPIO pin configured as "buzzer" after that pin gets unconfigured
wh…
vic42 updated
8 months ago