-
The touch screen seems to have lost its calibration, it seems offset to the right as it is impossible to touch the back button.
What is the procedure to recalibrate ?
Thks.
-
There is a typo in the file config.ini ( release 28.0.2 ) in file TFT_Rawr_X1.zip and TFT_Rawr_Genius.zip
the last line is : **distnace**_filament_extrude_calibration:180.0f
i bet it should be *…
-
I'm using the Makerbase tft32 and it works with 328p grbl, but not with STM32 grbl.
The makerbase tft32 sends grbl data to the grbl controller through serial, typically rx/tx.
https://github.com/m…
-
for saving:
class MyModelSave(Callback):
def on_train_epoch_end(self, trainer, pl_module):
torch.save(pl_module.state_dict(),"model.mdl")
for loading:
checkpoint = torch.load('m…
-
ESP32 LVGL WIFI&Bluetooth display board 2.8" 240*320 2.8inch TFT LCD with touch WROOM white screen error
![IMG_4652](https://github.com/justcallmekoko/ESP32Marauder/assets/126687034/db913e64-9b00-4…
-
Good evening, I used the compiled version "esp32-2432s028r_full_4MB_v0.7.0-rc9_c200edf" correctly on my device, now I have updated to the rc12 version but unfortunately I have display problems on the …
-
Tested on https://threefoldhub.test.gridtesting.xyz/
After completing a transaction from cosmos to bsc and trying to delete it while it's still unbatched i was not able to delete it even though i a…
-
My board's MCU: STM32F103C8T6
[I change the TFT support back to the Serial support.]
RESBI updated
6 years ago
-
Any chance for option to switch beteween TFT menu and Marlin menu?
-
Is it possible to add support for [WT32-SC01 Plus](http://en.smartpanle.com/product-item-15.html) ?
It is ESP32-WROVER-2-N8R2 based board with ST7796UI 3.5" 480*320 LCD and I2C FT6336U touch. It has …
troky updated
5 months ago