-
Hey,
great work with the OBD parser!
I have written a bluetooth connector for your module.
https://github.com/dominicrico/obd-parser-bluetooth-connection
Cheers!
-
Hi,
I am trying to implement your solution for monitoring my boiler, but it looks that I'm stuck at the very beginning. All I get from reading the bus is:
![image](https://user-images.githubusercont…
-
As a subissue of https://github.com/machinekit/machinekit/issues/586 I'll try to get history, questions, contemplations, answers, tips and all what passes collected into this issue.
During the proces…
-
I am running a basic lunch file that launches the /canopen.launch.py file. I am using a KINCO motor driver with the .eds coming from the supplier.
When I run the file, the terminal gets stuck on:
[…
-
### Description
1. Communication via Canbus between the actual Hunter robot.
2. Create a proper TF tree
3. Add drivers for IMU
4. Integrate with https://github.com/LCAS/aoc_strawberry_scenario
…
-
I'm trying to install an sb2209 board using U2C wired into a pi. I'm trying to get the board into DFU mode but haven't had any success. All I see when running "lsusb" on my pi is:
- OpenMoko, Inc. …
-
What would be required to emulate a BYD H or HVL batteries? I'd like to be able to use this with a SMA SBS6.0-US-10 inverter and SBS-ABU-200-US-10 / BUUM3-US-10 whole-home transfer switch in Canada. …
-
Hi Mingfei,
After about 2 hours of running scenario 1, it got frozen. I attached the log from terminal below. Since SVL discontinued, I was using the SVL client you provided, and connected to a l…
-
Hi, i m tryng to connect to my Seat but i recive some strange data, i have also triple checked the connectio and tried to swap tx and rx
I connect the cable to OBD port and RS232 to my laptop, afte…
-
I am looking to sniff the CANBUS on a 2011 (1KD-FTV) Toyota, which uses SAE J2534 and [this](https://www.vxdiagshop.com/wholesale/vxdiag-vcx-nano-for-toyota-wifi-version.html) is one of the few dongle…