-
The current code in `outlier_detection.flag_cr` uses a detector's read noise to model the difference between the noise in a blotted image and that in the detector image. It gets this from the read no…
-
First copying @matsen's Slack post here:
Here's a little thread about Fisher information for those interested.
Here's a nice review article: https://arxiv.org/pdf/1705.01064.pdf
The idea is …
-
**Description of the problem**
i generate the stack of alos1 (level 1.0 ) data by isce 2.5.3 stripMapStack.py,:
stackStripMap.py -s /public1/home/scf0015/mazhangfeng/SLC -d /public1/home/scf0015/m…
-
I believe I've found an algorithmic error in FGES. tl;dr the checks we do to decide if an arrow is valid are highly correlated but not equivalent to the correct checks.
For context, here's a short…
-
I had a question about some of the results coming out of celerite.
I'm fitting some data at times `t`. For a set of model parameters `theta`, I can calculate the likelihood using `gp.log_likelihood…
-
After applying the kolibrovochny sketch. My sensor started showing values in ppm like this: 12002000020
-
I've been noticing some weird behavior with my NevPT2 results, and I believe I have found the reason.
In my calculations, I am starting with an UHF, transforming the orbitals into UHF natural orbit…
-
#### Issue details
During flight in AUTO cruise and on a straight and level leg, I noticed our current goes up and down by quite a bit all the time. Looking at RCOU.C3 shows me the FC keeps changing…
-
In recent discussions and even implementations the idea of a noise model came up. Maybe even with separate parameters similar to the model_error.
### Main purpose:
The multiple model errors of …
-
- Wind data was converted to u and v velocity vectors.
- CW rotary spectrograms were taken for ease of integrating over desired time periods, to determine input 'power' from storms.
- (m/s)^2 isn't…