-
### Version
2.1.4
### Hardware / Firmware
FluidNC
### What happened
i want to use manual tool change in my gcode i use m0 at start of new tool
when it pause (hold) i can not jog or run z probe m…
-
## Here are the steps I follow to reproduce the issue:
1. estop off
2. turn machine on
3. home all
4. issue S4000 MDI command
## This is what I expected to happen:
S4000 command only c…
-
This is a request for comments, or perhaps ask for approval, to change the return value for public functions in the library `liblinuxcncini`, specifically file `src/libnml/inifile/inifile.hh`. This ch…
-
I have an SBC, an FPGA board and stepper motor drivers with STEP/DIR inputs. How do I connect it correctly?
As I understand, if FPGA and SBC both have 3.3V I/O levels, then SPI lines can be connect…
tpimh updated
9 months ago
-
Mesact Version: 2.1.2 Build Date: 1/24/2024
File "../../usr/bin/mesact", line 120, in
ex = MainWindow()
File "../../usr/bin/mesact", line 75, in __init__
startup.setup(self)
File…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Version
0.21 (Development)
### Full version info
```shell
[code]
OS: Gentoo Linux (sway)
Word size of Free…
-
Many users using GRBLHAL have reported errors with circular arcs. Upon inspecting their G-code, I had to explain to them that the CAM post-processor they were using omits the coordinates for the subse…
-
the CI has been failing for a while, anyone knows whats going on?
https://github.com/LinuxCNC/linuxcnc/actions/runs/6683612209/job/18159988194#step:7:9653
-
Hello, a user on the forum raised this issue, which I have known about, and experienced before.
The Axis DRO tab does not update when the tab is raised. After the first time the DRO tab is raised …
-
### Requested feature:
I've been using Mainsail a lot and it is really great. So first thanks a lot for it!
I have modified klipper to control 3 extra axes, and would like to have controls for the…