-
```
Hi, i bought a pro micro version of arduino. This version do not come with A4
and A5.. just came with A0 /A1 /A2 / A3. How can i use a OLED display( with
four pins -> VCC(ok), GND(ok), SCL(?), …
-
```
Hi, i bought a pro micro version of arduino. This version do not come with A4
and A5.. just came with A0 /A1 /A2 / A3. How can i use a OLED display( with
four pins -> VCC(ok), GND(ok), SCL(?), …
-
-
The bugs reported in the old Sourceforge thread persist:
[https://sourceforge.net/p/grackle/bugs/6/](https://sourceforge.net/p/grackle/bugs/6/)
-
```
glcd needs to support Leonardo board type.
This is not difficult and it is easy to detect the difference between
Teensy 1.x and Leonardo.
The key is to look for defines set by the teensy environme…
-
We're separating strict User Management from Micro-services Management (mostly authorization), though both (users and micro-services) are managed by the same User Management module.
-
I'm a bit of an electronics noob; but the BOM only lists "Arduino Pro Micro", with no link or anything …
Amazon lists a *ton* of clones for that search — is the implication that any one of them wil…
-
Why it is impossible to use Arduino OPC Server with Arduino Micro?
-
**[ UUID ]** c28faac8-b882-4817-839c-9adb9644543c
**[ Session Name ]** Making a Micro:bit Lockbox!
**[ Primary Space ]** Youth Zone
**[ Submitter's Name ]** Joe Glancy
**[ Submitter's Affiliated Or…
-
Which menu item has access to the default "Off" button G-Code commands?
I'm printing with a M3D Micro (original). The default "Off" G-code sets the controller in a different state that I cannot p…