-
commit: 7201a1d
Schematic review only.
# Review sethkaz:
### Fix:
- I might be wrong on this, but I believe the power ORing circuit might not work as intended.
- I believe the diodes shoul…
-
I have 2 different kind generic controllers (made in china), one of them work perfect, but the other kind don't work with PSXNwelib.
I try withe library PS2X_lib and the control work, switch to PsxN…
-
Hello,
First of all thank you for the firmware, I use it on my MK3S it's great everything is well configured.
I did not want to change the fan of mine because ultimately it is completely compati…
-
**Is your feature request related to a problem? Please describe.**
My problem is, that on my current controller, one pin needs to inverted to show the correct color on the whole strip. If its at the …
-
Update the PCB. Improvements should include:
Allow robot to run from higher voltage minimum 4 AA batteries
Measure battery voltage in place of temperature
Allow safe connection of USB without turni…
-
EDIT: Possible solution for 2 & 3 being tri-state buffer chip, e.g., 74125 (or variation).
1. If we want to use the GPIO pins of the MCP2221 to toggle flash/reset then we obviously have to roll our…
-
https://www.youtube.com/watch?v=CaFRl4nlNLY
I uploaded a howto video for flashing, just in case.
-
Most of these items originated from the SCH / PCB review meeting with Bunnie Huang on October 14 2015, which was one day after the prototype (Rev --) boards were ordered. These changes are intended t…
-
While the OLED is controlled by I2C via PINs 4(OLED_SDA) and 15(OLED_SCL) other I2C devices (e.g. Adafruit sensors) are connected via PIN 21 (SDA) and PIN 22 (SCL).
However, I2C via PINs 21/22 onl…
-
Hi,
your lib works really fine. Thank you for your work.
Do you think it is possible to read the Temperature and the drv error too?
Greetings
Georg