-
I am using the i2s to send the dmx data to my par, and I wired the di pin to the Rx pin on my nodemcu esp8266, the gnd and re pin on the nodemcu gnd pin, and the vcc to the vv pin on my node mcu. I co…
-
ESP-IDF is 3.3.6
**Collection of observations**
[functional](https://github.com/espruino/Espruino/tree/master/targets/esp32):
* [x] check wifi.save()
* [x] neopixel, now working with multipl…
-
I have a question on how to configure erizio to use TURN server with static-auth-secret. I have access to turn server which is used by another project where it uses folowing config:
```
listening-…
-
### The problem
Upgraded HA Core from 2024.7.1 to 2024.7.4 yesterday. After upgrade I lost all entities - Amps, Volts, etc on my PJ-1203 energy monitor. I though I had a bad piece of hardware, so …
-
**Describe the bug**
TuyAPI returns junk data and is unable to control the device.
**Expected behavior**
It works!
**Debug Output**
```Error! Timeout waiting for status response from device …
-
**Checklist**
* [ x] I've searched the issue tracker for similar bugs.
**Describe the bug**
```rust
(...)
let mut root_store = rustls::RootCertStore::empty();
root_store.roots = webpki_roots…
-
配置:
设备型号:烨晨YC01盒子,或M16 TV BOX盒子
CPU:S905X
运存:2GB
内存:16GB
刷armbian固件:[Armbian_24.8.0_amlogic_s905x-t95_bullseye_6.6.39_server_2024.07.15.img.gz](https://github.com/ophub/amlogic-s9xxx-armbian/rele…
-
### Bug description
Smart dimmer is properly detected by ZHA with quirk zhaquirks.tuya.ts0601_dimmer.TuyaSingleSwitchDimmer but only on-off switch is added, the brightness slider does not show up.
…
glcos updated
4 months ago
-
### Bug description
in spite of uploading [ts0601_garage.py](https://github.com/zigpy/zha-device-handlers/blob/dev/zhaquirks/tuya/ts0601_garage.py) no sensor appears, nor is there anything when I w…
-
### Category
Hardware Compatibility, Other
### Hardware
CDEBYTE_EORA_S3
### Firmware Version
2.3.10
### Description
My test environment has three devices which are: 1. v3 mqtt net…