-
Using a Raspberry Pi 3B+ and a logitech webcam, whenever the device boots up (like on a power outage) the camera boots up like this and all the recordings are corrupted:
![image](https://user-images.…
rzfzr updated
2 years ago
-
motionEyeOS version: 20180401 on Raspberry Pi Zero W with MMAL Camera
Connecting over WiFi
Unable to collect log files
While in normal operation (No other issues of defects apparent), after power…
-
I have tried to use motion detection recording and although I see the red outline, there are no videos that are saved. Now, keep in mind that I do not have a flash drive in. My motioneye is setup on a…
-
-
I am using Raspberry Pi 4 and HTPA32x32d thermal camera sensor. I am using https://github.com/cjcbusatto/thermografree this fork for reading the camera with I2C.
I use this sensor in my project And…
-
Hello,
I'm fairly new at Raspberry Pi world and I've been trying to set up a Security Camera in my home. I manage to download the project and compile it for my Raspberry Pi Zero but I'm not being ab…
-
The web manager does not display all of the drivers installed. I can run this driver command line indi_rpicam, but it does not display in the web manager.
So in Ekos if i pick this driver indi_rpi…
-
First of all thank you very much for picam code.
I run the motiontest.py file. My camera worked the light.
But how can I watch this broadcast with my ip address ?
This stream followed by an i…
-
Hi,
Python incompetant here (speak slowly with small words).
Using a Nikon D7000 as the camera in a photobooth on a raspberry pi which I leached thanks to /reuterbal I've thrown this question up the…
-
I'm currently running two lepton 3.5 cameras using two purethermal mini boards. I use opencv for continuous streaming of images. One of the boards runs continuously without any errors (tested for 2hr…