-
### Discussed in https://github.com/supermerill/SuperSlicer/discussions/3627
Originally posted by **ljungis** February 4, 2023
[Body.zip](https://github.com/supermerill/SuperSlicer/files/1060…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When running G34 on any bugfix branch after the 14th when the bed levels itself it then does …
-
Dear Sirs,
SD is not init on startup while RC1.0.8 work fine, is there default #define is changed ?
I have try to #define sd_detect_pin -1
also try to disable sd_detect_inverted, but no lucik
…
-
### Version
Any version
### Operating system type + version
Any OS
### 3D printer brand / version + firmware version (if known)
Any printer running Klipper
### Behavior
Klipper does not s…
-
### Is your feature request related to a problem?
Is this available in a configuration somewhere after a CURA build has been compiled?
**Problem description -**
when in CURA UI selecting 0%-…
-
Ich verstehe seit kurzem das Ergebnis des Z-Offset-Scans nicht mehr. Erstmal behauptet er immer, "Z-Skrew too low". Die Ziel-Position der Schraube scheint außerhalb des gültigen Bereichs zu liegen, we…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have an Ender 3 Pro with a BTT SKR E3 v2.0. I wanted to toy with the new input shaping and…
-
I got these errors when compiling the esp3d.ino using
Arduino IDE 2.0 on MacOS 13.6
NodeMCU v1.0.0 with 4mb
Core Esp8266 3.1.2 and 2.5.2
Esp3D 2.1.2 and 3.0
Target Repetier and Marlin firmware
…
-
Hello! Is it possible with Klipper to specify the velocity and acceleration parameters for the X & Y axis independently?
In the [printer] section of the config file, it appears as though _max_velo…
-
After performing "MAINTENANCE/Zmin evaluation" the resulting value causes the print nozzle to strike the side of the bed when trying to print. (When leaving home X,Y)
The issue appears to be Z_PROB…