-
1 all versions:
if you enter the menu -MOVE AXIS -and set the movement (1 mm) let 100mm , displacement will be larger (say 120 mm). When working with Repetier-Host the movement of the target value
-t…
-
I'm printing in the air after my start gcode does a g29 with servo mounted probe and auto bed leveling with Ramps 1.4. Any ideas?
[Configuration.txt](https://github.com/MarlinFirmware/Marlin/files/1…
-
Hey guys, I was directed here by the users on the Robo forums. I am trying to setup my LCD and all is well until it gets to the LED color portion. I get a compile error stating a line in the code is n…
-
Hi , I used your latest Marlin RCbugfix ( Latest commit a545290 6 hours ago) and uploaded it with IDE 1.6.8 , here are the results :
```
I can push the knob on "Prepare" and "Level bed" and then I tu…
-
## Device
- Product name: Stelpro Maestro(TM)
- Manufacturer: Stelpro
- Model identifier: SMT402AD
- Device type :
- Thermostat
## Screenshots
![image](https://user-images.…
-
#i am having problems homing my printer please watch the video. [youtu.be] used your marlin config to set it up. now this is a folgertech printer that i build 2 year . saw your prusa I3 clone builds s…
-
### The problem
Hi,
ZHA integration is not working after upgrading to 2022.10.0.
@dmulcahey, @Adminiuga, @puddly
### What version of Home Assistant Core has the issue?
2022.10.0
### What wa…
-
Hello,
I can not run a calibration with Marlin-1.1.0 RC7 (1.0.xxx OK) and Scara kinematic
I made a `G28`
then `M360` to move Theta 0 ° position
a look back `M114` (SCARA Cal - Theta: -17.82)
a …
-
When I use the MBL function in Marlin RC8 , the printhead start at 10mm above the printbed , and I must corrected more than -10mm to adjust the levelhight at Z 0.1 mm.
How can I adjust the Z hight …
-
Hi,
I tested this version and while trying to find the best auto level routine. The g30 and g29 work reliably and as expected. When I visualize the result of g29 I get a repeatable pattern.
I print…